374 / LinesModular ICS 7.1 Installer Guide N0130943 02ANI NumberSelect whether the telephone number of the caller will becollected for this line. The digits can then be displayed onNorstar telephones as part of Call Display services.Press CHANGE to select either: N (No) or Y (Yes).DNIS NumberSelect whether the digits dialed by an external caller on thisline will be collected.Press CHANGE to select either: N (No) or Y (Yes).Tips - The central office must deliver ANI/DNIS in DTMFmode. The delivery of ANI/DNIS depends on the networkprovider and the services they offer. This setting applies onlyto E&M and DID lines.For E&M or DID lines connected to a DTI, the setting onlyappears if Signal is WinkStart. For lines connected to anE&M or DID Trunk Cartridge, the setting only appears ifSignal is WinkStart or Immediate.If the conditions for signaling mode and start arrangement arenot met, prompts are not presented to the user. No additionalequipment is required.Tips - This setting applies to E&M lines only.For E&M lines connected to a DTI, this setting only appearsif Signal is WinkStart and Ans mode is set to Manual. ForE&M lines connected to an E&M Trunk Cartridge, this settingonly appears if Signal is WinkStart or Immediate andAns mode is set to Manual.These digits are required for some third-party softwareapplications.
