Terminals&Sets / 345N0130943 02 Modular ICS 7.1 Installer Guidecausing the network to present an incorrect CLID to thecalled party.Note: You can program PRI lines to block outgoing name andOLI. Refer to Send Name Display (PRI) on page 525.CapabilitiesSettings that control how the system interacts with individualtelephones and the calls they receive are found underCapabilities. The following table lists these headings. Thedefault settings are shown in bold.Setting Description OptionsFwd no answerFwd to Redirect all incoming calls when thistelephone does not answer.Enter DNNoneForwarddelaySelect the number of rings before anunanswered call is forwarded.2, 3, 4, 6, 10Fwd on busy Redirect all incoming calls when thistelephone is busy with another call.Enter DNNoneDND on Busy Select whether an incoming call rings ifthe user is already on another call.Y, NHandsfree Select whether handsfree will beavailable to a telephone.Auto, Std(Standard),NoneHF answerback Select whether a user can automaticallyanswer a voice call without lifting thereceiver or pressing the handsfree/mutebutton.Y, NPickup grp Assign this telephone to a pickup group. None, 1 to 9Page zone Assign this telephone to page zone. None, 1 to 6Paging Select whether paging announcementscan be made from this telephone.Y, ND-Dial Select whether you can call the Direct-dial telephone from this telephone usingthe Direct-dial digit.Set1 to Set5,None
