N0130943 02 Modular ICS 7.1 Installer GuideRegulationsNorth American Regulatory InformationSafetyThis equipment meets all applicable requirements of both theCSA C22.2 No.60950 and UL 60950.The shock hazard symbol within an equilateraltriangle is intended to alert personnel to electricalshock hazard or equipment damage. The followingprecautions should also be observed wheninstalling telephone equipment.Never install telephone wiring during a lightning storm.Never install telephone jacks in wet locations unlessthe jack is specifically designed for wet locations.Never touch uninsulated telephone wires or terminalsunless the telephone line has been disconnected at thenetwork interface.Use caution when working with telephone lines.DANGER: Risk of shock.Read and follow installation instructions carefully.Ensure the system and system expansion units areunplugged from the power socket and that anytelephone or network cables are unplugged beforeopening the system or system expansion unit.If installation of additional hardware and /or servicing isrequired, disconnect all telephone cable connectionsprior to unplugging the system equipment.Ensure the system and system expansion units areplugged into the wall socket using a three-prong powercable before any telephone cables are connected.
