Moving telephones / 293N0130943 02 Modular ICS 7.1 Installer GuideMoving telephonesYou can move a system telephone to a new location within theNorstar system without losing the programmed settings.When Set relocation is enabled in system programming,the internal numbers, autodial settings, and personal speed dialcodes remain with the telephone when it is unplugged.To move a telephone, simply unplug it and plug it in again atanother location. It may take up to 45 seconds for the ICS torecognize the telephone. Automatic telephone relocation isdisabled by default.Tips - Relocate the disconnected system telephone beforeconnecting a new telephone into the vacated jack. This allowsthe moved telephone to retain the programmed settings.If a new telephone is plugged into the vacated jack before theold telephone is reconnected at a new location, Norstar willgive the current telephone information to the new telephone.The old telephone will no longer be recognized by the system.When reprogramming the internal number of a telephone, waitone minute after Automatic Telephone Relocation.When you relocate a telephone, the telephone must remaininstalled and connected in the new location for at least threeminutes for the programming relocation to be complete.Moving the telephone again before the three-minute periodmay result in losing the programming on the telephone.
