Panasonic MINAS A5-series Operating Instructions Manual
                                                                                                                                                                                                                                                                                                                                                                                                          | |
Contents
|
7In the case of the motor with shaft end keyway, donot touch the keyway with bare hands. Failure to observe this instruc-tion could result in personalinjury.Do not touch the rotating portion of the motorwhile it is running.Do not touch the motor, servo driver, heat sinkand regenerative resistor, since they become veryhot.Failure to observe this instruc-tion could result in burns.Do not drive the motor with external power. Failure to observe this instruc-tion could result in fire.Do not subject the cables to excessive force,heavy object, or pinching force, nor damage thecables.Failure to observe this instruc-tion could result in electricalshocks, damages and break-downs.Installation area should be free from excessivedust, and from splashing water and oil.Failure to heed this precautionwill result in electric shock, per-sonal injury, fire, malfunction ordamage.Mount the motor, driver and regenerative resistoron incombustible material such as metal.Installation on a flammable ma-terial may cause fire.Wiring has to be carried out by the qualified andauthorized specialist.Allowing a person with no ex-pertise to carry out wiring willresult in electrical shocks.Correctly run and arrange wiring.Incorrect wiring will result inshort circuit, electric shock, per-sonal injury, etc.After correctly connecting cables, insulate the liveparts with insulator.Incorrect wiring will result shortcircuit, electric shock, fire ormalfunction.Ground the earth terminal of the motor and driverwithout fail.Floating ground circuit willcause electric shock.Install and mount the Product and machinerysecurely to prevent any possible fire or accidentsincurred by earthquake.Failure to heed this requirementwill result in electric shock, per-sonal injury, fire, malfunction ordamage.Install an emergency stop circuit externally so thatyou can stop the operation and shut off the powerimmediately.Install an overcurrent protection, earth leakagebreaker, over-temperature protection and emer-gency stop apparatus without fail.Failure to heed these require-ments will result in electricshock, personal injury or fire.Check and confirm the safety of the operationafter the earthquake.Before transporting, wiring and inspecting thedriver, turn off power and wait for a time longerthan that specified on the name plate on the sidepanel of the product; and make sure that there isno risk of electrical shock.Energized circuit will causeelectric shock.1 Before Using the Products2 Preparation3 Connection4 Setup5 Adjustment6 When in Trouble7 Supplement |
Related manuals for Panasonic MADHT1105
This manual is suitable for:
MADHT1105MADHT1107MADHT1505MADHT1507MBDHT2110MBDHT2510MCDHT3120MCDHT3520MDDHT3530MDDHT5540MDME202G1MDME302G1MDME402G1MDME502G1MEDHT7364MFDHTA390MFDHTB3A2MGME092G1MGME202G1MGME302G1MHME102G1MHME152G1MHME202G1MHME302G1MHME402G1MHME502G1MINAS A5-seriesMSME011G1MSME012G1MSME021G1MSME022G1MSME041G1MSME042G1MSME082G1MSME102G1MSME152G1MSME202G1MSME352G1MSME5AZG1
manualsdatabase
Your AI-powered manual search engine