Chapter 4 Settings — [NETWORK] menu100 - ENGLISH5) When the confirmation is displayed, select [OK] or [CANCEL], and press the button.Notef When using a DHCP server, confirm that the DHCP server is running.f Consult your network administrator regarding the IP address, subnet mask, and default gateway.[NETWORK CONTROL]Set up the control method of the network.1) Press as to select [NETWORK CONTROL].2) Press the button.f The [NETWORK CONTROL] screen is displayed.3) Press as to select an item, and press qw to change the setting.[WEB CONTROL] Set to [ON] to control with the web browser.[PJLink CONTROL] Set to [ON] to control with the PJLink protocol.[COMMAND CONTROL] Set to [ON] when controlling the projector with the control command format (x page 129) of the terminal. Refer to “Control commands via LAN” (x page 125).[COMMAND PORT] Set the port number used for command control.[CRESTRON RoomView] Set to [ON] to control with RoomView of Crestron Electronics, Inc.[AMX D.D.]Set to [ON] to control with the controller of AMX Corporation.Setting this function to [ON] enables detection through “AMX Device Discovery”. For details, refer tothe website of AMX Corporation.URL http://www.amx.com/[EXTRON XTP]Set to [ON] when connecting the “XTP transmitter” of Extron Electronics to the terminal.[EXTRON XTP] must be set to [OFF] when connecting the optional digital interface box (Model No.:ET-YFB100G).For details of the “XTP transmitter”, refer to the website of Extron Electronics.URL http://www.extron.com/[STORE] Save the current network control settings.4) Press as to select [STORE], and press the button.5) When the confirmation is displayed, select [OK] or [CANCEL], and press the button.[NETWORK STATUS]Display the status of the projector network.1) Press as to select [NETWORK STATUS].2) Press the button.f The [NETWORK STATUS] screen is displayed.Network connectionsThe projector has a network function, and the following operations are available from the computer using the web control.f Setting and adjustment of the projectorf Display of the projector statusf Sending of E-mail messages when there is a problem with the projectorThe projector supports “Crestron RoomView”, and the following application software of Crestron Electronics, Inc. can be used.f RoomView Expressf Fusion RVf RoomView Server EditionAttentionf Connect the LAN to indoor devices.
