Chapter 4 Settings — [ADVANCED MENU] menu58 - ENGLISH[ADVANCED MENU] menuOn the menu screen, select [ADVANCED MENU] from the main menu, and select the item fromthe sub-menu.Refer to “Navigating through the menu” (x page 44) for the operation of the menu screen.f After selecting the item, press asqw to set.[DIGITAL CINEMA REALITY]Increase the vertical resolution and enhance the image quality by performing cinema processing when the PAL (or SECAM) 576i signal, theNTSC 480i signal, and 1080/50i, 1080/60i are input.1) Press as to select [DIGITAL CINEMA REALITY].2) Press qw to switch [DIGITAL CINEMA REALITY].f The items will switch each time you press the button.[AUTO] Performs automatic detection and cinema processing. (Factory default)[OFF] Does not perform cinema processing.Notef When [FRAME RESPONSE] is set to [FAST], [DIGITAL CINEMA REALITY] cannot be set.[BLANKING]Adjust the blanking width if there are noises at the edge of the screen or the image is slightly running out from the screen while an image fromthe VCR or other devices are projected.1) Press as to select [BLANKING].2) Press the button.f The [BLANKING] adjustment screen is displayed.3) Press as to select [UPPER], [LOWER], [LEFT], or [RIGHT].4) Press qw to adjust the blanking.f The adjustment range is within 10 % of the resolution in each direction, and changes depending on the input signal.Blanking correction Item Operation Adjustment Range of adjustmentTop of the screen [UPPER]Press the q button. The blanking zonemoves upward.Top and bottom: 0(lower limit)Press the w button. The blanking zonemoves downward.Bottom of thescreen [LOWER]Press the w button. The blanking zonemoves upward.Press the q button. The blanking zonemoves downward.
