|
Chapter 4 Settings — [DISPLAY OPTION] menuENGLISH - 69[AUTO SIGNAL]Set automatic execution of auto setup.The screen display position or signal level can be adjusted automatically without pressing the button on the remote controlon each occasion if you input unregistered signals frequently at meetings, etc.1) Press as to select [AUTO SIGNAL].2) Press qw to switch [AUTO SIGNAL].f The items will switch each time you press the button.[OFF] Sets input auto setup to off.[ON] Executes auto setup automatically when images are changed to unregistered signals duringprojection.[AUTO SETUP]Set this when adjusting a special signal or horizontally long (such as 16:9) signal.1) Press as to select [AUTO SETUP].2) Press the button.f The [AUTO SETUP] screen is displayed.3) Press qw to switch [MODE].f The items will switch each time you press the button.[DEFAULT]Select when receiving a signal whose image aspect is 4:3 or 5:4. (Supported resolutions are640 x 400, 640 x 480, 800 x 600, 832 x 624, 960 x 720, 1 024 x 768, 1 152 x 864, 1 152 x 870,1 280 x 960, 1 280 x 1 024, 1 600 x 1 200, and 1 400 x 1 050)[WIDE] Select when receiving a signal whose image aspect is wide-screen. (Supported resolutions are720 x 400, 848 x 480, 1 280 x 720, 1 024 x 600, 1 120 x 750, 1 440 x 900, and 1 680 x 1 050)[USER] Select when receiving a signal with a special horizontal resolution (number of display dots).f When [DEFAULT] or [WIDE] is selected, proceed to Step 6).f When [USER] is selected, proceed to Step 4).4) Press as to select [DISPLAY DOTS], and press qw to adjust [DISPLAY DOTS] to the horizontalresolution of the signal source.5) Press as to select [MODE].6) Press the button.f Automatic adjustment is executed. [PROGRESS] is displayed while automatically adjusting. When complete, the system returns to the[AUTO SETUP] screen.[COMPUTER IN]Set to match the signal to input to the terminal.1) Press as to select [COMPUTER IN].2) Press the button.f The [COMPUTER IN] screen is displayed.3) Press qw to switch [SYNC SLICE LEVEL].f The items will switch each time you press the button.[LOW] Sets the slice level to [LOW].[HIGH] Sets the slice level to [HIGH]. PreviousNext |