Chapter 4 Settings — [3D SETTINGS] menuENGLISH - 65Notef When [3D MODE] is set to [3D SYNC] or [OFF], [DLP Link] cannot be set.f Before changing the [DLP Link] setting, display 3D images.When using VESA standard 3D eyewear1) Press as to select [3D SYNC].2) Press qw to switch [3D SYNC].f The items will switch each time you press the button.[NORMAL] Do not change the [NORMAL] setting if the 3D images are displayed correctly.[SWAPPED] Select this when left and right 3D images are swapped to be displayed.Notef When [3D MODE] is set to [DLP Link] or [OFF], [3D SYNC] cannot be set.f Before changing the [3D SYNC] setting, display 3D images.[3D INPUT FORMAT]Set the 3D format for the image signals being input.Set a 3D format that matches the input signal.1) Press as to select [3D INPUT FORMAT].2) Press the button.f The [3D INPUT FORMAT] screen is displayed.3) Press qw to select a 3D format.[AUTO]*1 Automatically detects 3D format of input image signals and displays images.[SIDE BY SIDE] Forcibly displays 3D images in side by side format regardless of input image signals.[TOP AND BOTTOM] Forcibly displays 3D images in top and bottom format regardless of input image signals.[FRAME SEQUENTIAL] Forcibly displays 3D images in frame sequential format regardless of input image signals.[NATIVE] Forcibly displays 2D images regardless of input image signals.*1 Only for HDMI input/DIGITAL LINK input4) Press the button.Notef This may not function properly for some connected external devices.[SAFETY PRECAUTIONS MESSAGE]Set to show or hide the safety precautions message related to 3D viewing when the projector is switched on.1) Press as to select [SAFETY PRECAUTIONS MESSAGE].2) Press qw to switch [SAFETY PRECAUTIONS MESSAGE].f The items will switch each time you press the button.[ON] Shows the safety precautions message related to 3D viewing when the projector is switched on.[OFF] Hides the safety precautions message related to 3D viewing when the projector is switched on.Notef Set to [OFF] to hide the safety precautions message related to 3D viewing when the projector is switched on.f A confirmation screen is displayed when switched from [ON] to [OFF]. Select [OK] on the confirmation screen and press the button to change the setting to [OFF].Attentionf When 3D images are viewed by unspecified number of people for commercial use, display the safety precautions message related to 3Dviewing to notify viewers.