Chapter 4 Settings — [DISPLAY OPTION] menuENGLISH - 71[HDMI IN]Switch the setting when the external equipment is connected to the terminal of the projector and the image is not projectedcorrectly.1) Press as to select [HDMI IN].2) Press the button.f The [HDMI IN] screen is displayed.3) Press qw to switch [SIGNAL LEVEL].f The items will switch each time you press the button.[AUTO] Automatically sets the signal level.[64-940] Select when the HDMI terminal of an external device (such as a blu-ray disc player) is connected tothe terminal.[0-1023]Select when the DVI terminal output of an external device (such as a computer) is connected to the terminal via a conversion cable or similar cable.Select also when the HDMI terminal output of a computer or other device is connected to the IN> terminal.Notef The optimal setting is different depending on the output setting of the connected external equipment. Refer to the instruction manual of theexternal equipment regarding the output of the external equipment.f The HDMI signal level is displayed for every 30 bits of input.[DIGITAL LINK IN]Set the signal level when DIGITAL LINK input is selected.1) Press as to select [DIGITAL LINK IN].2) Press the button.f The [DIGITAL LINK IN] screen is displayed.3) Press qw to switch [SIGNAL LEVEL].f The items will switch each time you press the button.[AUTO] Automatically sets the signal level.[64-940] Select when the HDMI terminal output of an external device (such as a blu-ray disc player) isconnected to the terminal via a twisted-pair-cable transmitter.[0-1023] Select this when the DVI terminal output or HDMI terminal output of an external device (such as acomputer) is connected to the terminal via a twisted-pair-cable transmitter.Notef The optimal setting is different depending on the output setting of the connected external equipment. Refer to the instruction manual of theexternal equipment regarding the output of the external equipment.[ON-SCREEN DISPLAY]Set the on-screen display.Setting [OSD POSITION]Set the position of the menu screen (OSD).1) Press as to select [ON-SCREEN DISPLAY].2) Press the button.f The [ON-SCREEN DISPLAY] screen is displayed.3) Press as to select [OSD POSITION].4) Press qw to switch [OSD POSITION].f The items will switch each time you press the button.[5] Sets to the center of the screen.[6] Sets to the bottom center of the screen.
