Chapter 4 Settings — [NETWORK] menu98 - ENGLISH[NETWORK] menuOn the menu screen, select [NETWORK] from the main menu, and select the item from thesub-menu.Refer to “Navigating through the menu” (x page 44) for the operation of the menu screen.f After selecting the item, press asqw to set.[DIGITAL LINK MODE]Switch the communication method of the terminal of the projector.1) Press as to select [DIGITAL LINK MODE].2) Press qw to switch [DIGITAL LINK MODE].f The items will switch each time you press the button.[AUTO] Switches the communication method automatically to DIGITAL LINK or Ethernet.[DIGITAL LINK] Fixes the communication method to DIGITAL LINK.[ETHERNET] Fixes the communication method to Ethernet.Possible communication modesSetting Communication possibleHDMI Ethernet RS-232C[AUTO] For DIGITAL LINK l l lFor Ethernet ― l ―[DIGITAL LINK] l l l[ETHERNET] ― l ―l: Communication possible―: Communication not possible[DIGITAL LINK SETUP]Set the communication method of DIGITAL LINK.When the projector is connected directly via Ethernet1) Press as to select [DIGITAL LINK SETUP].2) Press the button.f The [DIGITAL LINK SETUP] screen is displayed.3) Press as to select [DUPLEX(ETHERNET)].4) Press qw to switch the communication method.f The items will switch each time you press the button.[AUTONEGOTIATION] The communication method is set automatically.[100BaseTX-Full] Full-duplex communication method is set.[100BaseTX-Half] Half-duplex communication method is set.5) Press as to select [STORE].6) Press the button.7) When the confirmation is displayed, select [OK] or [CANCEL], and press the button.