Chapter 4 Settings — [PROJECTOR SETUP] menu84 - ENGLISH3) Select and assign program to each day of week.f Press as to select the day of week, and press qw to select a program number.f You can set the program from No.1 to No.7. “- - -” indicates that the program number has not been set.How to set a programSet up to 16 commands to each program.1) Press as to select [SCHEDULE].2) Press qw to select [ON], and press the button.f The [SCHEDULE] screen is displayed.3) Press as to select [PROGRAM EDIT].4) Press qw to select a program number, and press the button.5) Press as to select a command number, and press the button.f You can change the page using qw.6) Press as to select [TIME], and press the button.7) Press qw to select the hour and minute, press as to set the time, and then press the button.8) Press as to select [COMMAND].9) Press qw to switch [COMMAND].f The items will switch each time you press the button.f For the detailed settings of [COMMAND], the details set in Step 11) are displayed.[COMMAND] Detailed settings of[COMMAND] Description[POWER ON] ― Switches on the projector.[STANDBY] ― Enters standby.[AV MUTE] [OFF] Disables the AV mute function.[ON] Turns off the audio and video.[INPUT][COMPUTER] Switches the input to COMPUTER.[VIDEO] Switches the input to VIDEO.[DVI-I] Switches the input to DVI-I.[HDMI] Switches the input to HDMI.[DIGITAL LINK] Sets the input to DIGITAL LINK.[DIGITAL LINK INPUT][CURRENT]Switches to DIGITAL LINK input with the currently selectedconnection.Can only be selected when [INPUT] is set to [DIGITAL LINK].[INPUT1] - [INPUT10] *1Switches to DIGITAL LINK input, and that input switches to thespecified input when the Panasonic twisted-pair-cable transmitter isconnected. Can only be selected when [INPUT] is set to [DIGITALLINK].[LIGHT POWER][NORMAL] Prioritizes brightness.[ECO SAVE1] Reduces the power by approximately 20 % in average compared to[NORMAL] without affecting the brightness.[ECO SAVE2] Reduces the power by approximately 30 % in average compared to[NORMAL], minimizing reduction in brightness.[LOW] Saves more power and reduces brightness.[IN STANDBY MODE(AUDIO)] [OFF] Turns off audio output during standby.[ON] Turns on audio output during standby.[VOLUME] [0] - [63] Sets the volume.*1 When the Panasonic twisted-pair-cable transmitter (such as the optional digital interface box (Model No.: ET-YFB100G)) is connected to theprojector, its input name is reflected from [INPUT1] to [INPUT10] automatically. If an item where the input name is not reflected is selected, itis disabled.10) Press the button.f The [COMMAND] detailed screen is displayed.11) Press as to select a [COMMAND].f For [COMMAND] which requires detailed settings, the items of the detailed settings will switch each time you press qw.
