Chapter 2 Getting Started — Setting up26 - ENGLISHSetting up[PROJECTION METHOD] and [COOLING CONDITION]There are six ways to set up the projector. Set the [PROJECTOR SETUP] menu → [PROJECTION METHOD] and [COOLING CONDITION]depending on the environment. Also set [COOLING CONDITION] correctly. Using with incorrect settings may shorten the life of light source.Mounting on the ceiling and projecting forward Setting on a desk/floor and projecting from rear(Using the translucent screen)Menu item*1 Method Menu item *1 Method[PROJECTION METHOD] [FRONT/CEILING] [PROJECTION METHOD] [REAR/FLOOR][COOLING CONDITION] [CEILING SETTING] [COOLING CONDITION] [FLOOR SETTING]Mounting on the ceiling and projecting from rear(Using the translucent screen)Setting on a desk/floor and projecting forwardMenu item*1 Method Menu item *1 Method[PROJECTION METHOD] [REAR/CEILING] [PROJECTION METHOD] [FRONT/FLOOR][COOLING CONDITION] [CEILING SETTING] [COOLING CONDITION] [FLOOR SETTING]Portrait setting and projecting from the rear(Using the translucent screen)Portrait setting and projecting forwardMenu item*1 Method Menu item *1 Method[PROJECTION METHOD] [REAR/FLOOR] [PROJECTION METHOD] [FRONT/FLOOR][COOLING CONDITION] [PORTRAIT SETTING] [COOLING CONDITION] [PORTRAIT SETTING]*1 For menu item details, refer to the [PROJECTOR SETUP] menu → [PROJECTION METHOD] (x page 76) and [COOLING CONDITION](x page 77).Parts for ceiling mount (optional)You can install the projector using the optional ceiling mount bracket (Model No.: ET-PKR100H (for high ceilings), ET-PKR100S (for lowceilings), or ET-PKR100P (for portrait)).f Use only the ceiling mount brackets specified for this projector.f Refer to the installation manual for the ceiling mount bracket when installing and setting up the bracket and the projector.Attentionf To ensure projector performance and security, installation of the ceiling mount bracket must be carried out by your dealer or a qualifiedtechnician.