Chapter 4 Settings — [PROJECTOR SETUP] menu90 - ENGLISH2) Press the button.f The [DATE AND TIME] screen is displayed.3) Press as to select [TIME ZONE].4) Press qw to switch [TIME ZONE].Setting the date and time manually1) Press as to select [DATE AND TIME].2) Press the button.f The [DATE AND TIME] screen is displayed.3) Press as to select [ADJUST CLOCK].4) Press the button.f The [ADJUST CLOCK] screen is displayed.5) Press as to select an item, and press qw to set the local date and time.6) Press as to select [APPLY], and press the button.f The setting of the time will be completed.Setting the date and time automatically1) Press as to select [DATE AND TIME].2) Press the button.f The [DATE AND TIME] screen is displayed.3) Press as to select [ADJUST CLOCK].4) Press the button.f The [ADJUST CLOCK] screen is displayed.5) Press as to select [NTP SYNCHRONIZATION], and press qw to change the setting to [ON].f The items will switch each time you press the button.[OFF] Disables [NTP SYNCHRONIZATION].[ON] Enables [NTP SYNCHRONIZATION].6) Press as to select [APPLY], and press the button.f The setting of the time will be completed.Notef To set the date and time automatically, the projector must be connected to the network.f If synchronization with the NTP server fails just after [NTP SYNCHRONIZATION] is turned [ON], or if [NTP SYNCHRONIZATION] is turned[ON] while the NTP server is not set, [NTP SYNCHRONIZATION] will return to [OFF].f Access the projector via a web browser to set the NTP server. Refer to “[Adjust clock] page” (x page 108) for details.[SAVE ALL USER DATA]Save the various setting values as a backup in the built-in memory of the projector.1) Press as to select [SAVE ALL USER DATA].2) Press the button.f The [SECURITY PASSWORD] screen is displayed.3) Enter a security password and press the button.4) When the confirmation is displayed, select [OK] or [CANCEL], and press the button.f [PROGRESS] is displayed while saving data.Notef The image setting registered in [USER LOGO] is not saved.
