Chapter 4 Settings — [PICTURE] menu52 - ENGLISHNotef When a name is changed, display of the [USER] menu is also changed.[DAYLIGHT VIEW]You can correct the image to the optimal vividness even if it is projected under a bright light.1) Press as to select [DAYLIGHT VIEW].2) Press qw or the button.f The [DAYLIGHT VIEW] individual adjustment screen is displayed.3) Press qw to switch [DAYLIGHT VIEW].f The items will switch each time you press the button.[AUTO] Corrects the image vividness automatically.[OFF] No correction.[1] Corrects the image to weaken vividness.[2] Corrects the image to medium vividness.[3] Corrects the image to high vividness.Notef If [ON] is selected from the [ADVANCED MENU] menu → [EDGE BLENDING], [AUTO] cannot be set.f If [REAR/FLOOR] or [REAR/CEILING] is selected from the [PROJECTOR SETUP] menu → [PROJECTION METHOD], [AUTO] cannot beset.f [AUTO] mode may not operate properly if objects are placed on top of the projector.f If [PICTURE MODE] is [NATURAL], [REC709], or [DICOM SIM.], the factory default setting is [OFF].[SHARPNESS]You can adjust the sharpness of the projected image.1) Press as to select [SHARPNESS].2) Press qw or the button.f The [SHARPNESS] individual adjustment screen is displayed.3) Press qw to adjust the level.Operation Adjustment Range of adjustmentPress the w button. Contours become sharper. 0 - 15Press the q button. Contours become softer.Notef If you press w while the adjustment value is [15], the value will become [0]. If you press q while the adjustment value is [0], the value willbecome [15].f [SHARPNESS] cannot be set while displaying 3D images.[NOISE REDUCTION]You can reduce noises when the input image is degraded and noise is occurring in the image signal.1) Press as to select [NOISE REDUCTION].2) Press qw or the button.f The [NOISE REDUCTION] individual adjustment screen is displayed.3) Press qw to switch [NOISE REDUCTION].f The items will switch each time you press the button.[OFF] No correction.[ON] Corrects the noise.Attentionf Setting the projector may result in an image that appears different from the actual image. In such a case, set it to [OFF].f [NOISE REDUCTION] cannot be set when viewing 3D videos.
