Panasonic PT-RZ470EK Operating Instructions Manual

Contents

Chapter 6 Appendix — SpecificationsENGLISH - 133SpecificationsThe following table describes the specifications of the projector.Model No. PT-RZ470EK/PT-RZ470EW PT-RW430EK/PT-RW430EWPower supply AC 100 V - 240 V 50 Hz/60 HzPower consumption460 W (5.2 A - 2.0 A)0.5 W when [STANDBY MODE] is set to [ECO]8 W when [STANDBY MODE] is set to [NORMAL] (when fan is stopped)DLP chipPanel size 16.5 mm (0.65") (aspect ratio 16:9) 16.5 mm (0.65") (aspect ratio 16:10)Display system 1-unit DLP chip, DLP typeNumber of pixels 2 073 600 pixels(1 920 x 1 080 dots)1 024 000 pixels(1 280 x 800 dots)LensZoom 1.5 to 2.9:1 1.5 to 3.1:1Focus F = 2.0 to 3.4f = 21.5 mm to 43.0 mmLight source Hybrid light source (LED/laser diode)Light output *1 3 500 lm (ANSI)Contrast ratio *1 20 000:1Applicablescanningfrequency *2For video signal Horizontal: 15.75 kHz/15.63 kHz, Vertical: 50 Hz/60 HzFor RGB signalHorizontal: 15 kHz to 100 kHz, Vertical: 24 Hz to 120 HzPIAS (Panasonic Intelligent Auto Scanning) systemDot clock frequency162 MHz or lowerFor YCB C R /YPB PRsignalf 525i (480i)Horizontal: 15.75 kHz, Vertical: 60 Hzf 525p (480p)Horizontal: 31.5 kHz, Vertical: 60 Hzf 750 (720)/60pHorizontal: 45 kHz, Vertical: 60 Hzf 1125 (1035)/60iHorizontal: 33.75 kHz, Vertical: 60 Hzf 1125 (1080)/50iHorizontal: 28.13 kHz, Vertical: 50 Hzf 1125 (1080)/24sFHorizontal: 27 kHz, Vertical: 48 Hzf 1125 (1080)/30pHorizontal: 33.75 kHz, Vertical: 30 Hzf 1125 (1080)/50pHorizontal: 56.25 kHz, Vertical: 50 Hzf 625i (576i)Horizontal: 15.63 kHz, Vertical: 50 Hzf 625p (576p)Horizontal: 31.25 kHz, Vertical: 50 Hzf 750 (720)/50pHorizontal: 37.5 kHz, Vertical: 50 Hzf 1125 (1080)/60iHorizontal: 33.75 kHz, Vertical: 60 Hzf 1125 (1080)/24pHorizontal: 27 kHz, Vertical: 24 Hzf 1125 (1080)/25pHorizontal: 28.13 kHz, Vertical: 25 Hzf 1125 (1080)/60pHorizontal: 67.5 kHz, Vertical: 60 HzFor DVI-D signal525p (480p), 625p (576p), 750 (720)/60p, 750 (720)/50p,1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/24p,1125 (1080)/24sF, 1125 (1080)/25p, 1125 (1080)/30p,1125 (1080)/60p, 1125 (1080)/50pf Displayable resolution: VGA to WUXGA (non-interlaced)WUXGA signal supports only VESA CVT-RB (Reduced Blanking) signal.f Dot clock frequency: 25 MHz to 162 MHzFor HDMI signal525p (480p), 625p (576p), 750 (720)/60p, 750 (720)/50p,1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/24p,1125 (1080)/24sF, 1125 (1080)/25p, 1125 (1080)/30p,1125 (1080)/60p, 1125 (1080)/50pf Displayable resolution: VGA to WUXGA (non-interlaced)WUXGA signal supports only VESA CVT-RB (Reduced Blanking) signal.f Dot clock frequency: 25 MHz to 162 MHz*1 Measurement, measuring conditions and method of notation all comply with ISO21118 international standards.*2 Refer to “List of compatible signals” (x page 130) for the types of video signals that can be used with the projector.