2 - ENGLISHRead this first!Read this first!WARNING: THIS APPARATUS MUST BE EARTHED.WARNING: To prevent damage which may result in fire or shock hazard, do not expose this appliance to rainor moisture.This device is not intended for use in the direct field of view at visual display workplaces. To avoidincommoding reflexions at visual display workplaces this device must not be placed in the directfield of view.The equipment is not intended for used at a video workstation in compliance BildscharbV.The sound pressure level at the operator position is equal or less than 70 dB (A) according to ISO 7779.WARNING:1. Remove the plug from the mains socket when this unit is not in use for a prolonged period of time.2. To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualifiedservice personnel.3. Do not remove the earthing pin on the mains plug. This apparatus is equipped with a three prongearthingtype mains plug. This plug will only fit an earthing-type mains socket. This is a safety feature. If youare unable to insert the plug into the mains socket, contact an electrician. Do not defeat the purpose of theearthing plug.WARNING:This is a class A product. In a domestic environment this product may cause radio interference in which casethe user may be required to take adequate measures.CAUTION: To assure continued compliance, follow the attached installation instructions, which includeusing the provided power cord and shielded interface cables when connecting to computer orperipheral device. If you use serial port to connect PC for external control of projector, you mustuse a commercial RS-232C serial interface cable with ferrite core. Any unauthorized changes ormodifications to this equipment will void the user’s authority to operate.Notice on laserThis projector is the Class 1 laser product that complies with IEC 60825-1.Product information (for Turkey only)EEE Yönetmeliğine Uygundur.EEE Complies with Directive of Turkey.