Chapter 4 Settings ā [SECURITY] menuENGLISH - 97[CONTROL DEVICE SETUP]Enable/disable the button operations on the control panel and the remote control.1) Press as to select [CONTROL DEVICE SETUP].2) Press the button.f The [CONTROL DEVICE SETUP] screen is displayed.3) Press as to select [CONTROL PANEL] or [REMOTE CONTROL].4) Press the button.f The [CONTROL PANEL] screen or the [REMOTE CONTROL] screen is displayed.5) Press as to select [ENABLE] or [DISABLE].f You can set the operation restriction from the control panel or the remote control.[ENABLE] Enables all button operations on the projector body or the remote control.[DISABLE] Disables all button operations on the projector body or the remote control.6) Press the button.7) When the confirmation is displayed, select [OK] or [CANCEL], and press the button.Notef When a button operation is performed on the device set to [DISABLE], the [SECURITY PASSWORD] screen is displayed.To continue operations, enter the security password.f The [SECURITY PASSWORD] screen will disappear when the ten seconds.f If the operations of both [CONTROL PANEL] and [REMOTE CONTROL] are set to [DISABLE], the projector cannot be turned off (cannotenter standby).f When the setting has completed, the menu screen will disappear. To operate continuously, press the menu.