Panasonic PT-RZ470EK Operating Instructions Manual

Contents

ENGLISH - 5Read this first!WARNING:Do not cover the air intake/exhaust ports or place anything within 500 mm (20") of them.Doing so will cause the projector to overheat, which can cause fire or damage to the projector.f Do not place the projector in narrow, badly ventilated places.f Do not place the projector on cloth or papers, as these materials could be drawn into the air intake port.Do not look at the light emitted from the lens while the projector is being used.Doing so can cause loss of sight.f Strong light is emitted from the projector’s lens. Do not directly look at this light.Do not expose your eyes and skin to the projection light while the projector is being used.Possibly hazardous optical radiation is emitted from this product, causing damage to your eyes and skin.f Be especially careful not to let young children look into the lens. In addition, turn off the power anddisconnect the power plug when you are away from the projector.Never attempt to remodel or disassemble the projector.High voltages can cause fire or electric shocks.f For any inspection, adjustment and repair work, please contact an Authorized Service Center.Doing so may cause exposure to dangerous laser radiation.f The laser module is built in this projector. Follow procedures specified in the Operating Instructions to makeoperations and adjustments.Do not allow metal objects, flammable objects, or liquids to enter inside of the projector. Do not allowthe projector to get wet.Doing so may cause short circuits or overheating, and result in fire, electric shock, or malfunction of theprojector.f Do not place containers of liquid or metal objects near the projector.f If liquid enters inside of the projector, consult your dealer.f Particular attention must be paid to children.Use the ceiling mount bracket specified by Panasonic.Using the ceiling mount bracket other than the specified one will result in falling accidents.f Attach the supplied safety cable to the ceiling mount bracket to prevent the projector from falling down.Installation work (such as ceiling mount bracket) should only be carried out by a qualified technician.If installation is not carried out and secured correctly it can cause injury or accidents, such as electric shocks.f Do not use anything other than an authorized ceiling mount bracket.f Be sure to use the provided accessory wire with an eye bolt as an extra safety measure to prevent theprojector from falling down. (Install in a different location to the ceiling mount bracket.)