Panasonic PT-RZ470EK Operating Instructions Manual

Contents

Chapter 4 Settings — [NETWORK] menuENGLISH - 103f Do not perform setting or control simultaneously by starting up multiple web browsers. Do not set or control the projector from multiplecomputers.f Change the password first. (x page 113)f The administrator rights allows to use all functions. The user rights only allows use of [Projector status] (x page 103), confirmation of theerror information page (x page 104), [Network status] (x page 105), [Basic control] (x page 106), [Advanced control] (x page 106),[Change password] (x page 113).f Access will be locked for few minutes when an incorrect password is entered three times consecutively.f Some items on the projector setting page use the Javascript function of the web browser. The projector may not be able to be controlledproperly if it is set with a browser that does not have this function enabled.f While updating the screen for the web control, the screen may become white for a moment, but it is not a malfunction.Descriptions of items1234561 Page tabSwitches pages by clicking this item.2 [Status]The status of the projector is displayed by clicking this item.3 [Projector control]The [Projector control] page is displayed by clicking this item.4 [Detailed set up]The [Detailed set up] page is displayed by clicking this item.5 [Change password]The [Change password] page is displayed by clicking this item.6 [CRESTRON RoomView]The control page of RoomView is displayed by clicking this item.[Projector status] pageClick [Status] → [Projector status].Display the status of the projector for the following items.910115678123412131 [PROJECTOR TYPE]Displays the type of the projector.2 [MAIN VERSION]Displays the firmware version of the projector.3 [POWER]Displays the status of the power.4 [LIGHT POWER]Displays the setting status of [LIGHT POWER] (x page 77).5 [SERIAL NUMBER]Displays the serial number of the projector.6 [NETWORK VERSION]Displays the version of the firmware of the network.7 [AV MUTE]Displays the AV mute status.8 [VOLUME]Displays the volume status.9 [INPUT SELECT]Displays the status of the input selection.10 [INTAKE AIR TEMPERATURE]Displays the status of the air intake temperature of the projector.11 [OPTICS MODULE TEMPERATURE]Displays the status of the internal temperature of the projector.12 [SELF TEST]Displays the self-diagnosis information.13 [PROJECTOR RUNTIME]Displays the runtime of the projector.