| 
Chapter 1 Preparation — About your projector22 - ENGLISHNotef The remote control can be used within a distance of about 15 m (49'2") if pointed directly at the remote control receiver. The remote controlcan control at angles of up to ± 15° vertically and ± 30° horizontally, but the effective control range may be reduced.f If there are any obstacles between the remote control and the remote control signal receiver, the remote control may not operate properly.f The signal will be reflected off the screen. However, the operating range may be limited from light reflection loss due to the screen material.f If the remote control signal receiver directly receives strong light, such as fluorescent light, the remote control may not operate properly. Useit in a place distant from the light source.f The power indicator will flash if the projector receives a remote control signal.Projector body1 2 34 5 76 48 9812111613 910814515FrontFrontFront SideRear8 917FrontBottom1 Power indicator Displays the status of the power.2 Light source indicator Displays the status of the light source.3 Temperature indicator Displays the internal temperature status.4 Adjustable feetAdjusts the projection angle.5 Remote control signal receiver6 Projection lens7 Lens shift leverAdjusts the projection position.8 Air intake port9 Air exhaust port10 Security slotThis security slot is compatible with the Kensington securitycables.11 Connecting terminals (x page 23)12 terminalConnect the supplied power cord.13 switchTurns on/off the main power.14 Focus ringAdjusts the focus.15 Zoom ringAdjusts the zoom.16 Control panel (x page 23)17 Burglar hook portAttaches a burglar prevention cable, etc. |
