Chapter 4 Settings — [NETWORK] menu110 - ENGLISH111099 [E-MAIL ADDRESS 2]Enter the E-mail address to be sent when two E-mail addressesare to be used.Leave it blank when two E-mail addresses are not to be used.10 Settings of the conditions to send E-mailSelect the conditions to send E-mail to the second E-mailaddress.[MAIL CONTENTS]:Select either [NORMAL] or [SIMPLE].[ERROR]:Send an E-mail when an error occurred in the self-diagnosis.[INTAKE AIR TEMPERATURE]:Send an E-mail when the air intake temperature has reachedthe value set at the above field.[PERIODIC REPORT]:Place a check mark on this to send E-mail to the second E-mailaddress periodically. It will be sent on the days and time withthe check mark.11 [Submit]Update the settings.[Authentication set up] pageSet the authentication items when POP authentication or SMTP authentication is necessary to send an E-mail.Click [Detailed set up] → [Authentication set up].123456781 [Auth]Select the authentication method specified by your Internetservice provider.2 [SMTP Auth]Set when the SMTP authentication is selected.3 [POP server name]Enter the POP server name.Allowed characters:Alphanumerics (A to Z, a to z, 0 to 9)Minus sign (-) and period (.)4 [User name]Enter the user name for the POP server or the SMTP server.5 [Password]Enter the password for the POP server or the SMTP server.6 [SMTP server port]Enter the port number of the SMTP server.(Normally 25)7 [POP server port]Enter the port number of the POP server.(Normally 110)8 [Submit]Update the settings.
