Chapter 4 Settings — [PROJECTOR SETUP] menu88 - ENGLISH[AUDIO SETTING]Set advanced audio functions.Adjusting the volume1) Press as to select [AUDIO SETTING].2) Press the button.f The [AUDIO SETTING] screen is displayed.3) Press as to select [VOLUME].4) Press qw to adjust the level.Operation Adjustment Range of adjustmentPress the w button. Increases the volume. 0 - 63Press the q button. Decreases the volume.Adjusting the left/right audio balance1) Press as to select [AUDIO SETTING].2) Press the button.f The [AUDIO SETTING] screen is displayed.3) Press as to select [BALANCE].4) Press qw to adjust the level.Operation Adjustment Range of adjustmentPress the w button. Increases the volume on the right. L16 - R16Press the q button. Increases the volume on the left.Setting the audio output during standby1) Press as to select [AUDIO SETTING].2) Press the button.f The [AUDIO SETTING] screen is displayed.3) Press as to select [IN STANDBY MODE].4) Press qw to switch [IN STANDBY MODE].f The items will switch each time you press the button.[OFF] Turns off audio output during standby.[ON] Turns on audio output during standby.Notef When [STANDBY MODE] (x page 78) of [ECO MANAGEMENT] is set to [ECO], audio cannot be output during standby.f The projector has no built-in speakers.Audio can be output via external audio systems connected to the audio output terminal.Setting audio input when HDMI input is selected1) Press as to select [AUDIO SETTING].2) Press the button.f The [AUDIO SETTING] screen is displayed.3) Press as to select [HDMI].
