Chapter 4Settings—[PROJECTOR SETUP] menuENGLISH - 894)Pressqwto switch [HDMI].fThe items will switch each time you press the button.[HDMI AUDIO]Outputs HDMI audio.[AUDIO IN]Outputs audio connected via the NotefIf COMPUTER, DVI-I, or VIDEO input is selected, audio connected to the Setting audio input when DIGITAL LINK input is selected1)Pressasto select [AUDIO SETTING].2)Press the button.fThe[AUDIO SETTING]screen is displayed.3)Pressasto select [DIGITAL LINK].4)Pressqwto switch [DIGITAL LINK].fThe items will switch each time you press the button.[DIGITAL LINK AUDIO]Outputs DIGITAL LINK audio.[AUDIO IN]Outputs audio connected via the NotefIf COMPUTER, DVI-I, or VIDEO input is selected, audio connected to the [STATUS]Display the status of the projector.1)Pressasto select [STATUS].2)Press the button.fThe[STATUS]screen is displayed.3)Pressqwto switch the pages.fThe page will change each time you press the button.[INPUT]Displays the input terminal currently selected.[SIGNAL NAME]Displays the input signal name.[SIGNAL FREQUENCY]Displays the frequency of the input signal.[PROJECTOR RUNTIME]Displays the operation times of the projector.[INTAKE AIR TEMP.]Displays the status of the air intake temperature of the projector.[OPTICS MODULE TEMP.]Displays the status of the internal temperature of the projector.[NUMBER OF ENTRYSIGNAL]Displays the number of registered signals.[EMULATE]Displays the [EMULATE] settings.[PROJECTOR TYPE]Displays the type of the projector.[SERIAL NUMBER]Displays the serial number of the projector.[MAIN VERSION]Displays the main version of the firmware of the projector.[SUB VERSION]Displays the sub version of the firmware of the projector.[NETWORK VERSION]Displays the network version of the projector.NotefThe content of status can be sent via E-mail by pressing the button while displaying the status.[DATE AND TIME]Set the time zone, date, and time of the built-in clock of the projector.Setting the time zone1)Pressasto select [DATE AND TIME].