Chapter 4 Settings — [DISPLAY OPTION] menu74 - ENGLISH[BACK COLOR]Set the display of the projected screen when there is no signal input.1) Press as to select [BACK COLOR].2) Press qw to switch [BACK COLOR].f The items will switch each time you press the button.[BLUE] Displays the entire projection area in blue.[BLACK] Displays the entire projection area in black.[DEFAULT LOGO] Displays the Panasonic logo.[USER LOGO] Displays the image registered by the user.Notef To create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM.[STARTUP LOGO]Set the logo display when the power is turned on.1) Press as to select [STARTUP LOGO].2) Press qw to switch [STARTUP LOGO].f The items will switch each time you press the button.[DEFAULT LOGO] Displays the Panasonic logo.[USER LOGO] Displays the image registered by the user.[NONE] Disables the startup logo display.Notef The startup logo will disappear in approximately 15 seconds.f To create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM.[SUB MEMORY LIST]The projector has a sub memory function that can register the multiple image adjustment data, even if it is recognized as the same signal bythe frequency or format of the synchronization signal source.Use this function when you need to adjust the image quality such as switching of the aspect ratio or white balance by the samesynchronization signal source. The sub memory includes all the data that can be adjusted for each signal, such as the screen aspect ratio anddata adjusted in the [PICTURE] menu ([CONTRAST], [BRIGHTNESS], etc.).Registering the current settings to the list1) Press as to select [SUB MEMORY LIST], and press the button.f The sub memory registration screen is displayed if the sub memory is not registered. Proceed to Step 3).f A list of sub memories registered to the signal currently input is displayed.f [SUB MEMORY LIST] can be displayed by pressing qw on the normal screen (when the menu is not displayed).2) Press asqw to select the sub memory number to register in [SUB MEMORY LIST].3) Press the button.f The [RENAME] screen is displayed.4) Press the button.f To rename the registered signal, follow the procedure in Steps 4) and 5) in “Renaming the registered signal” (x page 93).