Chapter 6: Device Management102Enabling Direct Port Access via URLDirect port access allows users to bypass having to use the device'sLogin dialog and Port Access page.This feature also provides the ability to enter a username and passworddirectly to proceed to the target, if the username and password is notcontained in the URL.If you are using the Virtual KVM Client (VKC) and direct port access, useone of the following syntaxes: https://IPaddress/dpa.asp?username=username&password=password&port=port number https://IPaddress/dpa.asp?username=username&password=password&portname=port nameTo enable direct port access:1. Choose Device Settings > Device Services. The Device ServiceSettings page opens.2. Select Enable Direct Port Access via URL if you would like users tohave direct access to a target via the Dominion device by passing inthe necessary parameters in the URL.3. Click OK.Configuring SNMP AgentsSNMP-compliant devices, called agents, store data about themselves inManagement Information Bases (MIBs) and return this data to the SNMPmanagers. See Viewing the KX II-101-V2 MIB (on page 114) forinformation on viewing the KX II-101-V2 MIB.KX II-101-V2 supports SNMP logging for SNMP v1/v2c and/or v3. SNMPv1/v2c defines message formats and protocol operations when SNMPlogging is enabled. SNMP v3 is a security extension of SNMP thatprovides user authentication, password management and encryption.To configure SNMP agents:1. Choose Device Settings > Device Services. The Device ServiceSettings page opens.2. Provide the following SNMP agent identifier information for the MIB-IISystem Group objects:a. System Name - the SNMP agent's name/device nameb. System Contact - the contact name related to the devicec. System Location - the location of the device
