Chapter 6: Device Management110Note: IPv6 addresses cannot exceed 80 characters in length for thehost name.b. Port Number - the port number used by the SNMP managerc. Security Name - the username or service account name of theentity communicating with the SNMP agent (up to 32 characters)d. Authentication Protocol - the MD5 or SHA authenticationprotocol used by the SNMP v3 agente. Authentication Passphrase - the passphrase required to accessthe SNMP v3 agent (up to 64 characters)f. Privacy Protocol - if applicable, the AES or DES algorithm usedto encrypt PDU and context datag. Privacy Passphrase - the passphrase used to access the privacyprotocol algorithm (up to 64 characters)6. Click OK to create the SNMP traps.Use the Link to SNMP Agent Configuration link to quickly navigate to theDevices Services page from the Event Management - Settings page.The events that are captured once an SNMP trap is configured areselected on the Event Management - Destination page. See ConfiguringEvent Management - Destinations.KX II-101-V2 supports SNMP logging for SNMP v1/v2c and/or v3. SNMPv1/v2c defines message formats and protocol operations when SNMPlogging is enabled. SNMP v3 is a security extension of SNMP thatprovides user authentication, password management and encryption.To edit existing SNMP traps:1. Choose Device Settings > Event Management - Settings. The EventManagement - Settings page opens.2. Make changes as needed and click OK to save the changes.
