Chapter 6: Device Management1222. For that power strip, select the appropriate outlet from the OutletName drop-down list.3. From the Outlet Name drop-down list, select None.4. Click OK. That power strip/outlet association is removed. Aconfirmation message appears.To show the power port configuration: Choose Home > Device Settings > Port Configuration > [power portname]. The outlet associations for the power strip appear underOutlets.To edit the power port configuration:1. Change the power port name by editing the port Name field.2. Change an outlet name by editing the associated outlets Name field.The outlet name appears in the Power Strip Device page. SeeControlling a Power Strip Device.3. Change the outlet association by clicking the Port Association linknext to the outlet name and editing it in the Port 1 page.Controlling a Power Strip DeviceControl the power strip device using the Power Strip Device page. Thispage enables you to turn each outlet on the power strip on and off.To control the power strip connected to the KX II-101-V2:1. Choose Home > Powerstrip. The Power Strip Device page opens.2. Click the On or Off button for each outlet to run it on or off.3. Click OK when prompted to confirm your choice.Note: The KX II-101-V2 can control only one power strip. You cannotselect another power strip from the Powerstrip menu.
