Chapter 7: Managing USB Connections1282. Click USB Connection Settings to expand the USB ConnectionSettings section.3. Select the USB connection settings you will be using: Enable Absolute Mouse - Applies only if USB is activeKeyboard/Mouse Interface Use Full Speed - Useful for BIOS that cannot accommodate HighSpeed USB devices Absolute mouse scaling for MAC server - Applies only if USB isactive Keyboard/Mouse Interface USB Sun Keyboard support - Applies only if USB is activeKeyboard/Mouse Interface4. Click OK.Advanced USB Connection SettingsWARNING: It is possible, based on the selections you make in theAdvanced USB Connection Settings section, to cause configurationproblems between the KX II-101-V2 and the target server. Therefore,Raritan strongly recommends that you refer to the Known USBProfiles or to the User Defined KX II-101-V2 USB Profiles ConnectionConfiguration Table, which can be accessed by clicking itscorresponding link on the Advanced USB Connection Settings sectionof the Port page .To define advanced USB connections for the target server:1. Click Device Settings > Port Configuration to open the PortConfiguration page. Click on the port you want to configure.2. Click Advanced USB Connection Settings to expand the section.
