Chapter 5: User Management76control. It is possible to be locked out of your KX II-101-V2 if your IPaddress is within a range that has been denied access.This feature limits access to the KX II-101-V2 device by users in theselected group to specific IP addresses. This feature applies only tousers belonging to a specific group, unlike the IP Access Control Listfeature that applies to all access attempts to the device, is processedfirst, and takes priority.Important: The IP address 127.0.0.1 is used by the KX II-101-V2Local Port and cannot be blocked.Use the IP ACL section of the Group page to add, insert, replace, anddelete IP access control rules on a group-level basis.To add (append) rules:1. Type the starting IP address in the Starting IP field.2. Type the ending IP address in the Ending IP field.3. Choose the action from the available options: Accept - IP addresses set to Accept are allowed access to theKX II-101-V2 device. Drop - IP addresses set to Drop are denied access to the KX II-101-V2 device.4. Click Append. The rule is added to the bottom of the rules list.Repeat steps 1 through 4 for each rule you want to enter.To insert a rule:1. Enter a rule number (#). A rule number is required when using theInsert command.2. Enter the Starting IP and Ending IP fields.3. Choose the action from the Action drop-down list.4. Click Insert. If the rule number you just typed equals an existing rulenumber, the new rule is placed ahead of the exiting rule and all rulesare moved down in the list.
