Chapter 3: Working with Target Servers42Disconnecting KVM Target ServersTo disconnect a target server: On the Port Access page, click the port name of the target you wantto disconnect from, then click Disconnect on Port Action menu whenit appears.Tip: You can also close the Virtual KVM Client window by selectingConnection > Exit from the Virtual KVM menu.Connection PropertiesDynamic video compression algorithms maintain KVM console usabilityunder varying bandwidth constraints.The devices optimize KVM output not only for LAN use, but also for WANuse.These devices can also control color depth and limit video output,offering an optimal balance between video quality and systemresponsiveness for any bandwidth.The parameters in the Properties dialog can be optimized to suit yourneeds for different operating environments. Connection properties aresaved across subsequent connections to generation 2 devices once theyare set and saved.To set the connection properties:1. Choose Connection > Properties or click the Connection Propertiesbutton in the toolbar. The Properties dialog appears.2. Choose the Connection Speed from the drop-down list. The devicecan automatically detect available bandwidth and not limit bandwidthuse. However, you can also adjust this usage according tobandwidth limitations. Auto 1G Ethernet 100 Mb Ethernet 10 Mb Ethernet 1.5 Mb (MAX DSL/T1) 1 Mb (Fast DSL/T1) 512 Kb (Medium DSL/T1) 384 Kb (Slow DSL/T1) 256 Kb (Cable)
