Appendix A: Specifications181Port DescriptionConfigurable Ports389 or 636via the LDAP/LDAPS protocol, ports 389 or 636 will be used, but thesystem can also be configured to use any port of your designation.OptionalRADIUS onConfigurable Port1812If the KX II-101-V2 is configured to remotely authenticate user loginsvia the RADIUS protocol, either port 1812 will be used, but the systemcan also be configured to use any port of your designation. OptionalRADIUS Accountingon Configurable Port1813If the KX II-101-V2 is configured to remotely authenticate user loginsvia the RADIUS protocol, and also employs RADIUS accounting forevent logging, port 1813 or an additional port of your designation will beused to transfer log notifications.SYSLOG onConfigurable UDPPort 514If the KX II-101-V2 is configured to send messages to a Syslog server,then the indicated port(s) will be used for communication - uses UDPPort 514.SNMP Default UDPPortsPort 161 is used for inbound/outbound read/write SNMP access andport 162 is used for outbound traffic for SNMP traps. OptionalTCP Port 22 Port 22 is used for the KX II-101-V2 command line interface (when youare working with Raritan Technical Support).SSH (Secure Shell) SSH port can be configured. The default is port 22.Telnet Telnet port can be configured but is not recommended. The default portis 23.Network Speed SettingsKX II-101-V2 network speed settingNetworkswitch portsettingAuto 100/Full 100/Half 10/Full 10/HalfAuto HighestAvailableSpeedKX II-101-V2: 100/FullSwitch:100/Half100/Half KX II-101-V2: 10/FullSwitch:10/Half10/Half100/Full KX II-101-V2: 100/HalfSwitch:100/Full100/Full KX II-101-V2: 100/HalfSwitch:100/FullNoCommunicationNoCommunication100/Half 100/Half KX II-101-V2: 100/FullSwitch:100/Half100/Half NoCommunicationNoCommunication
