Chapter 6: Device Management106Admin PortTo configure the admin serial port:1. Choose Device Settings > Serial Port. The Serial Port Settings pageappears.2. Select the Admin Port radio button.3. Choose one of these options to connect to the KX II-101-V2 directlyfrom a client PC and access the Command Line Interface through aprogram such as Hyperterminal. See Command Line Interface(CLI) (on page 162).4. In the Serial Settings section, configure the following fields: Speed Stop Bits Data Bits Handshake Parity5. Click OK.Raritan Power Strip ControlTo configure the power strip serial port:1. Choose Device Settings > Serial Port. The Serial Port Settings pageopens.2. Select the PowerStrip Control radio button. Choose this option whenconnecting the KX II-101-V2 to a Raritan power strip.3. Click OK.ModemTo configure the modem serial port:1. Choose Device Settings > Serial Port. The Serial Port Settings pageopens.2. Select the Modem radio button. Choose this option when attachingan external modem to the KX II-101-V2 in order to provide dial-upaccess.3. In the Modem Settings section, configure the following fields: Serial line speed Modem init string - The default string displayed in the field mustbe used to enable modem access.
