Chapter 3: Working with Target Servers60Client Launch SettingsConfiguring client launch settings allows you to define the screensettings for a KVM session.Note: LX devices support this feature in MPC. LX does not support clientlaunch setting in VKC and AKC.To configure client launch settings:1. Click Tools > Options. The Options dialog appears.2. Click on the Client Launch Settings tab. To configure the target window settings:a. Select 'Standard - sized to target Resolution' to open the windowusing the target's current resolution. If the target resolution isgreater than the client resolution, the target window covers asmuch screen area as possible and scroll bars are added (ifneeded).b. Select 'Full Screen' to open the target window in full screenmode. To configure the monitor on which the target viewer is launched:a. Select 'Monitor Client Was Launched From' if you want the targetviewer to be launched using the same display as the applicationthat is being used on the client (for example, a web browser orapplet).b. Use 'Select From Detected Monitors' to select from a list ofmonitors that are currently detected by the application. If apreviously selected monitor is no longer detected, 'CurrentlySelected Monitor Not Detected' is displayed. To configure additional launch settings:a. Select 'Enable Single Cursor Mode' to enable single mousemode as the default mouse mode when the server is accessed.b. Select 'Enable Scale Video' to automatically scale the display onthe target server when it is accessed.c. Select 'Pin Menu Toolbar' if you want the toolbar to remainvisible on the target when it is in Full Screen mode. By default,while the target is in Full Screen mode, the menu is only visiblewhen you hover your mouse along the top of the screen.3. Click OK.
