Chapter 11: Command Line Interface (CLI)163Accessing the KX II-101-V2 Using the CLIAccess the KX II-101-V2 using one of the following methods: TELNET via IP connection SSH (Secure Shell) via IP connection Multi-function admin serial port via RS-232 serial interface withprovided cable and a terminal emulation program like HyperTerminalSeveral SSH/TELNET clients are available and can be obtained from thefollowing locations: PuTTy - http://www.chiark.greenend.org.uk/~sgtatham/putty/http://www.chiark.greenend.org.uk/~sgtatham/putty/ SSH Client from ssh.com - www.ssh.com http://www.ssh.com Applet SSH Client - www.netspace.org/sshhttp://www.netspace.org/ssh OpenSSH Client - www.openssh.org http://www.openssh.orgNote: Accessing the CLI by SSH or TELNET requires you to set upaccess in the Device Services page of the KX II-101-V2 Remote Client.See Device Services (on page 100).SSH Connection to the KX II-101-V2Use any SSH client that supports SSHv2 to connect to the device. Youmust enable SSH access from the Devices Services page. See DeviceServices (on page 100).Note: For security reasons, SSH V1 connections are not supported bythe KX II-101-V2.SSH Access from a Windows PCTo open an SSH session from a Windows® PC:1. Launch the SSH client software.2. Enter the IP address of the KX II-101-V2 server. For example,192.168.0.192.3. Choose SSH, which uses the default configuration port 22.4. Click Open.5. The login as: prompt appears.
