Chapter 5: User Management81Logging Users Off the KX II-101-V2 (Force Logoff)If you are an administrator, you are able to log off any authenticated userwho is logged on to the KX II-101-V2. Users can also be disconnected atthe port level. See Disconnecting Users from Ports (on page 80).To log a user off the KX II-101-V2:1. Choose User Management > Users by Port. The Users by Port pageopens.2. Select the checkbox next to the username of the person you want todisconnect from the target.3. Click Force User Logoff.4. Click OK on the Logoff User confirmation message.Adding a New UserIt is a good idea to define user groups before creating KX II-101-V2users because, when you add a user, you must assign that user to anexisting user group. See Adding a New User Group.From the User page, you can add new users, modify user information,and reactivate users that have been deactivated.Note: A user name can be deactivated when the number of failed loginattempts has exceeded the maximum login attempts set in the SecuritySettings page. See Security Settings (on page 130).To add a new user:1. Select User Management > Add New User or click Add on the UserList page.2. Type a unique name in the Username field, up to 16 characters.3. Type the person's full name in the Full Name field, up to 64characters.4. Type a password in the Password field and retype the password inthe Confirm Password field, up to 64 characters.5. Choose the group from the User Group drop-down list.If you do not want to associate this user with an existing User Group,select Individual Group from the drop-down list. For more informationabout permissions for an Individual Group, see Setting Permissionsfor an Individual Group (on page 78).6. To activate the new user, leave the Active checkbox selected. ClickOK.
