Chapter 6: Device Management115Configuring Event Management - DestinationsSystem events, if enabled, generate SNMP notification events (traps), orcan be logged to the syslog or audit log. Use the Event Management -Destinations page to select the system events to track and where tosend this information.Note: SNMP traps are generated only if the SNMP Logging Enabledoption is selected. Syslog events are generated only if the Enable SyslogForwarding option is selected. Both of these options are in the EventManagement - Settings page. See Configuring Event Management -Settings (on page 108).To select events and their destinations:1. Choose Device Settings > Event Management - Destinations. TheEvent Management - Destinations page opens.System events are categorized by Device Operation, DeviceManagement, Security, User Activity, and User Group Administration.2. Select the checkboxes for those event line items you want to enableor disable, and where you want to send the information.Tip: Enable or disable entire Categories by checking or clearing theCategory checkboxes, respectively.3. Click OK.To reset to factory defaults: Click Reset To Defaults.WARNING: When using SNMP traps over UDP, it is possible for theKX II-101-V2 and the router that it is attached to fall out ofsynchronization when the KX II-101-V2 is rebooted, preventing thereboot completed SNMP trap from being logged.Port ConfigurationThe Port Configuration page displays a list of the KX II-101-V2 ports.Ports connected to KVM target servers or power strips are displayed inblue and can be edited.To change a port configuration:1. Choose Device Settings > Port Configuration. The Port Configurationpage opens.
