Information Center Configuration Commands 1023ParameterNoneDescriptionUse the terminal monitor command to enable the terminal display functions.Use the undo terminal monitor command to disable the terminal displayfunctions.By default, the system enables the functions of debugging/log/trap information onthe console and disable them on the terminal.This command only takes effect on the current terminal where the commands areinput. The debugging/log/trap information can be output to the current terminal,beginning in user view. When the terminal monitor is shut down, nodebugging/log/trap information will be displayed in local terminal, which is equalsto having performed undo terminal debugging, undo terminal logging,undo terminal trapping commands. When the terminal monitor is enabled, youcan use terminal debugging / undo terminal debugging, terminal logging /terminal logging and terminal trapping / undo terminal trappingrespectively to enable or disable the corresponding functions.Example# Disable the terminal monitor. undo terminal monitorterminal trapping Syntaxterminal trappingundo terminal trappingViewUser viewParameterNoneDescriptionUse the terminal trapping command to enable terminal display function of trapinformation.Use the undo terminal trapping command to disable this function.By default, this function is enabled.Example# Enable the terminal display function of trap information. terminal trapping