OSPF Configuration Commands 431Tos 0 metric: 1E type : 2Forwarding Address: 0.0.0.0Tag: 1display ospf nexthop Syntaxdisplay ospf [ process-id ] nexthopViewAny viewParameterprocess-id: Process ID of OSPF. The command is applied to all current OSPFprocesses if you do not specify a process ID.DescriptionUse the display ospf nexthop command to view the information about thenext-hop.Example# Display the OSPF next-hop information. display ospf nexthopOSPF Process 1 with Router ID 1.1.1.1Address Type Refcount Intf Addr Intf Name---------------------------------------------------------------------202.38.160.1 Direct 3 202.38.160.1 Vlan-interface2202.38.160.2 Neighbor 1 202.38.160.1 Vlan-interface2Table 61 Description of the fields of the display ospf lsdb ase commandField Descriptiontype Type of the LSAls id Link state ID of the LSAadv rtr Router ID of the router originating the LSAls age Age of the LSA in secondslen Length of the LSAseq# Sequence number of the LSAchksum Checksum of the LSAOptions Options of the LSANet mask Network maskE type Type of external routeForwarding Address Forwarding addressTag TagTable 62 Description of the fields of the display ospf nexthop commandField DescriptionAddress Address of next hopType Type of next hopRefcount Reference count of the next hop, i.e., number of routes using this address as thenext hopIntf Addr IP address of the outgoing interface to the next hop
