252 CHAPTER 17: Q OS COMMANDSInterface: Mirrors traffic to the designated destination port.DescriptionUse the mirrored-to command to activate an ACL and mirror data streams to theCPU or the designated destination port. Use the undo mirrored-to command toremove traffic mirroring setting.This configuration is only applicable to the packets which match the permittedrules in the ACL.Related command: display qos-interface mirrored-to.Example# Mirror the packets which match the permitted rules in the ACL 2000 toEthernet2/1/1. system-viewSystem View: return to User View with Ctrl+Z.[SW8800]interface Ethernet2/1/1[3Com-Ethernet2/1/1] mirrored-to inbound ip-group 2000 cpu rule 0interface Ethernet 2/1/1mirroring-group Syntaxmirroring-group groupid { inbound | outbound } mirroring-port-listmirrored-to monitor-portundo mirroring-group groupidViewSystem viewParametergroupid: mirroring group ID, in the range of 1 to 24inbound: Monitors only the inbound packets at the port.outbound: Monitors only the outbound packets at the port.mirroring-port-list: Ethernet port list, including multiple Ethernet ports, in the formof port-list = { interface-type interface-number } &<1-8>. &<1-8> means theparameter can be typed eight times at most.mirrored-to monitor-port: Specifies monitoring port.DescriptionUse the mirroring-group command to configure a mirroring group for the port.Use the undo mirroring-group command to remove mirroring group setting.The switch supports multiple-to-one mirroring, that is, copying the packets atseveral ports to the monitoring port. For Switch 8800 Family series, you cancomplete port mirroring setting by configuring mirroring groups. Each mirroring
