400 CHAPTER 24: RIP CONFIGURATION COMMANDSRelated commands: acl, filter-policy import, ip ip-prefix.Example# Filter the advertised route information according to ACL 2000.[3Com-rip] filter-policy 2000 exportfilter-policy import Syntaxfilter-policy gateway ip-prefix-name importundo filter-policy gateway ip-prefix-name importfilter-policy { acl-number | ip-prefix ip-prefix-name [ gateway ip-prefix-name ] }importundo filter-policy { acl-number | ip-prefix ip-prefix-name [ gatewayip-prefix-name ] } importViewRIP viewParameteracl-number: Access control list number used for filtering the destination addressesof the routing information.ip-prefix-name: Name of address prefix list used for filtering the destinationaddresses of the routing information.gateway ip-prefix-name: Name of address prefix list used for filtering theaddresses of the neighboring routers advertising the routing information.DescriptionUse the filter-policy gateway import command to configure to filter thereceived routing information distributed from the specified address.Use the undo filter-policy gateway import command to configure not to filterthe received routing information distributed from the specified address.Use the filter-policy import command to configure the filtering to the receivedglobal routing information.Use the undo filter-policy import command to disable filtering to the receivedglobal routing informationBy default, RIP does not filter the received routing information.Related commands: acl, filter-policy export, ip ip-prefix.Example# Configure the filtering of the received global routing information according toACL 2000.[3Com-rip] filter-policy 2000 import