150 CHAPTER 11: E THERNET L INK AGGREGATION CONFIGURATION COMMANDSundo debugging lacp state [ interface interface-type interface-number [ tointerface-type interface-number ] ] { { actor-churn | mux | partner-churn | ptx |rx }* | all }ViewUser viewParameterinterface interface-type interface-number [ to interface-type interface-number ]:Specifies a port or ports. The command without the parameter to specifies oneport, while the command with the parameter to specifies several contiguousports. interface-type indicates port type. interface-number indicates port number.For more information, see the parameter description of the interface command.actor-churn: Actor-churn state machine debugging switch.mux: MUX state machine debugging switch.partner-churn: Partner-churn state machine debugging switch.ptx: PTX state machine debugging switch.rx: RX state machine debugging switch.all: debugging switch of all state machines.DescriptionUse the debugging lacp state command to enable LACP state machinedebugging for the port.Use the undo debugging lacp state command to disable LACP state machinedebugging for the port.Example# Enable debugging of all LACP state machines. debugging lacp state alldebugginglink-aggregation errorSyntaxdebugging link-aggregation errorundo debugging link-aggregation errorViewUser viewParameterNoneDescriptionUse the debugging link-aggregation error command to enable linkaggregation error debugging.
