LDP Configuration Commands 715# Display MPLS L3VPN ingress lsp information on PE (Provider Edge). display mpls l3vpn-lsp ingress-------------------------------------------------------------------LSP Information: L3vpn Ingress Lsp-------------------------------------------------------------------Vpn-instance Name: vpna Route Distinguisher: 100:1NO FEC NEXTHOP OUTER-LABEL OUT-INTERFACE1 168.3.1.0/24 10.10.1.1 1026(vpn) Vlan10TOTAL: 1 Record(s) Found.# Display MPLS L3VPN egress lsp information on PE. display mpls l3vpn-lsp egress---------------------- -------------------------------------------LSP Information: L3vpn Egress Lsp-------------------------------------------------------------------NO VRFNAME INNER-LABEL NEXTHOP OUT-INTERFACE1 vpna 4096 0.0.0.0 InLoop0TOTAL: 1 Record(s) Found.I/O-LABEL Incoming/Outgoing label. VPN labels (labels advertised with VPNV4routes) will be displayed in case of uni-hop EBGP cross-AS MPLS L3 VPNnetworking, and tunneling labels (labels advertised with unicast routesand labels advertised by LDP protocol) will be displayed in case ofmulti-hop EBGP cross-AS MPLS L3 VPN networking.NEXTHOP Next hopIN-INTERFACE Ingress interfaceOUT-INTERFACE Egress interfaceTable 95 Description on the fields of the commandField DescriptionNO NumberFEC Forwarding equivalent classNEXTHOP Next hopOUTER-LABEL Outer label (MPLS Tunneling Label)OUT-INTERFACE Egress interfaceTable 96 Description on the fields of the commandField DescriptionNO NumberVRFNAME Name of VPN InstanceINNER-LABEL Inner label (VPN label)NEXTHOP Next hopOUT-INTERFACE Egress interfaceTable 94 Description on the fields of the commandField Description
