152 CHAPTER 11: E THERNET L INK AGGREGATION CONFIGURATION COMMANDSdisplay link-aggregationsummarySyntaxdisplay link-aggregation summaryViewAny viewParameterNoneDescriptionUse the display link-aggregation summary command to view summaryinformation of all aggregation groups, including local device ID, aggregationgroup ID, aggregate group type, peer device ID, number of Selected ports, numberof Standby ports, load sharing type and master port number.Example# Display summary information of all aggregation information. display link-aggregation summaryAggregation Group Type:D -- Dynamic, S -- Static , M -- ManualLoadsharing Type: Shar -- Loadsharing, NonS -- Non-LoadsharingActor ID: 0x8000, 00e0-fc23-0d90AL AL Partner ID Select Standby Share MasterID Type Ports Ports Type Port--------------------------------------------------------------------------------1 M none 2 0 Shar GigabitEthernet3/1/13 M none 4 0 Shar Ethernet4/1/45display link-aggregationverboseSyntaxdisplay link-aggregation verbose [ agg-id ]Table 20 Description on the fields of the display lacp system-id commandField DescriptionActor System ID The device ID of the local system, including system priority and system MACaddress.Table 21 Description on the fields of the display link-aggregation summary commandField DescriptionActor ID Local device IDAL ID Aggregation group IDAL Type Aggregation group typePartner ID Peer device IDSelect Ports Number of selected portsStandby Ports Number of standby portsShare Type Load sharing typeMaster Port Master port number
