MSDP Configuration Commands 639Parameterpeer-address: Address of MSDP peer.DescriptionUse the display msdp peer-status command to view the detailed information ofMSDP peer.Related command: peer.Example# Display the detailed information of the MSDP peer 10.110.11.11. display msdp peer-status 10.110.11.11MSDP Peer 20.20.20.20, AS 100Description:Information about connection status:State: UpUp/down time: 14:41:08Resets: 0Connection interface: LoopBack0 (20.20.20.30)Number of sent/received messages: 867/947Number of discarded output messages: 0Elapsed time since last connection or counters clear: 14:42:40Information about (Source, Group)-based SA filtering policy:Import policy: noneExport policy: noneInformation about SA-Requests:Policy to accept SA-Request messages: noneSending SA-Requests status: disableMinimum TTL to forward SA with encapsulated data: 0SAs learned from this peer: 0, SA-cache maximum for the peer: noneInput queue size: 0, Output queue size: 0Counters for MSDP message:Count of RPF check failure: 0Incoming/outgoing SA messages: 0/0Incoming/outgoing SA requests: 0/0Incoming/outgoing SA responses: 0/0Incoming/outgoing data packets: 0/0display msdp sa-cache Syntaxdisplay msdp sa-cache [ group-address | source-address |autonomous-system-number ]*ViewAny viewParametergroup-address: Group address of (S, G) entry.source-address: Source address of (S, G) entry. With no source address specified,all the source information of the specified group will be displayed.If neither group address nor source address is determined, all SA caches will bedisplayed.
