DHCP Server Configuration Commands 839Dhcp Inform: 0Boot Reply: 4Dhcp Offer: 1Dhcp Ack: 3Dhcp Nak: 0Bad Messages: 0display dhcp server tree Syntaxdisplay dhcp server tree { pool [ pool-name ] | interface [ vlan-interfacevlan-id ] | all }ViewAny viewParameterpool [ pool-name ]: Specifies a global address pool. If you do not specify a globaladdress pool, all global address pools are included.interface [ vlan-interface vlan-id ]: Specifies the address pool of a VLANinterface. If you do not specify a VALN interface, address pools of all VLANinterfaces are included.all: Specifies all addresses pools.DescriptionUse the display dhcp server tree command to display information about DHCPaddress pool hierarchy.Table 108 Description on the fields of the display dhcp server statistics commandField DescriptionGlobal Pool The information followed is about the statistics of the global addresspoolsInterface Pool The information followed is about the statistics of the address pools ofVLAN interfacesPool Number Number of address poolsAuto Number of automatically bound IP addressesManual Number of manually bound IP addressesExpire Number of expired IP addressesBoot Request: 6Dhcp Discover: 1Dhcp Request: 4Dhcp Decline: 0Dhcp Release: 1Dhcp Inform: 0Total and categorized DHCP packets received by the DHCP serverBoot Reply: 4Dhcp Offer: 1Dhcp Ack: 3Dhcp Nak: 0Total and categorized DHCP packets sent by the DHCP serverBad Messages Number of bad DHCP packets
