QoS Commands 243Example# Display all the QoS parameter configurations of all the VLANs. display qos-vlan allVlan 1 traffic-limitInbound:There is no configuration.Outbound:There is no configuration.Vlan 1 traffic-priorityInbound:There is no configuration.Outbound:There is no configurationVlan 1 traffic-redirectInbound:There is no configuration.Outbound:There is no configurationVlan 1 traffic-statisticInbound:There is no configuration.Outbound:There is no configuration.Vlan 2 traffic-limitInbound:Matches: Acl 2000 rule 1 running (Action-type: Eacl, Destination slot: 3)Committed Information Rate: 8192 KbpsCommitted Burst Size: 10000 byte(s)Excess Burst Size: 20000 byte(s)Peak Information Rate: 0 KbpsExceed action: dropOutbound:There is no configurationVlan 2 traffic-priorityInbound:Matches: Acl 2000 rule 1 running (Action-type: Eacl, Destination slot: 3)Priority action: remark-policed-service, untrusted, dscp: 13, cos: 6,Local-precedence: 6, drop-priority: 1Outbound:There is no configurationVlan 2 traffic-redirectInbound:Matches: Acl 2000 rule 1 running (Action-type: Eacl, Destination slot: 3)Redirected to: next-hop 1.1.1.1Outbound:There is no configurationVlan 2 traffic-statisticInbound:There is no configuration.Outbound:There is no configuration.---- More ----display qos-vlantraffic-limitSyntaxdisplay qos-vlan [ vlan-id ] traffic-limitViewAny viewParametervlan-id: ID of a VLAN, in the range of 1 to 4094.
