SNMP Configuration Commands 901display snmp-agentmib-viewSyntaxdisplay snmp-agent mib-view [ exclude | include | { viewname mib-view } ]ViewAny viewParameterexclude: Displays the SNMP MIB view excluded.Include: Displays the SNMP MIB view included.viewname: Displays the SNMP MIB view according to the mib view name.mib-view: Specifies the MIB view name.DescriptionUse the display snmp-agent mib-view command to view the MIB viewconfiguration information of the switch.Example# Display the information about the currently configured MIB view. display snmp-agent mib-viewView name:ViewDefaultMIB Subtree:internetSubtree mask:Storage-type: nonVolatileView Type:includedView status:activeView name:ViewDefaultMIB Subtree:snmpUsmMIBSubtree mask:Storage-type: nonVolatileView Type:excludedView status:activeView name:ViewDefaultMIB Subtree:snmpVacmMIBSubtree mask:Storage-type: nonVolatileView Type:excludedView status:activeThe following table describes the output fields.Security model The security mode adopted by SNMPreadview Read-only MIB view name corresponding to that groupwriteview Writable MIB view corresponding to that groupnotifyview The name of the notify MIB view corresponding to that groupstorage-type Storage modeTable 125 Description on the fields of the display snmp-agent group commandField Description