696 CHAPTER 39: MPLS B ASIC CONFIGURATION COMMANDSBy default, you can view all the Remote-peer configurations.Related command: mpls ldp remote-peer and remote-ip.Example# Display the Remote-peer configuration. display mpls ldp remoteDisplaying information about all Ldp Remote Peers:Remote Index: 1Peer Address: 1.1.1.1 Transport Address: 2.2.2.2Configured KeepAlive hold time:60, Configured Hello hold time:45Negotiated Hello hold time:45Hello packets sent/rcv:6515/6509Remote Index: 3Peer Address: 3.3.3.3 Transport Address: 2.2.2.2Configured KeepAlive hold time:60, Configured Hello hold time:45Negotiated Hello hold time:45Hello packets sent/rcv:6457/6453Remote Index: 4Peer Address: 1.1.0.3 Transport Address: 2.2.2.2Configured KeepAlive hold time:60, Configured Hello hold time:45Negotiated Hello hold time:0Hello packets sent/rcv:0/0Remote Index: 7Peer Address: 1.1.1.7 Transport Address: 2.2.2.2Configured KeepAlive hold time:60, Configured Hello hold time:45Negotiated Hello hold time:0Hello packets sent/rcv:0/0display mpls ldp session Syntaxdisplay mpls ldp session [ | begin text | exclude text | include text ]ViewAny viewParameter|: Displays matched outputs.begin: Displays the outputs matching the regular expression from the first line.exclude: Displays the outputs excluding those lines matching the regularexpression.include: Displays only those outputs matching the regular expression.text: Contents of the regular expression.DescriptionUse the display mpls ldp session command to know the session between peerentities.
