422 CHAPTER 25: OSPF C ONFIGURATION COMMANDSViewAny viewDescriptionUse the display debugging ospf command to view the debugging states ofglobal OSPF and all processes.Related command: debugging ospf.Example# Display the debugging states of global OSPF and all processes. display debugging ospfOSPF global debugging state:OSPF SPF debugging is onOSPF LSA debugging is onOSPF process 100 debugging state:OSPF SPF debugging is onOSPF process 200 debugging state:OSPF SPF debugging is onOSPF LSA debugging is ondisplay ospf abr-asbr Syntaxdisplay ospf [ process-id ] abr-asbrViewAny viewParameterprocess-id: Process ID of OSPF. The command is applied to all current OSPFprocesses if you do not specify a process ID.DescriptionUse the display ospf abr-asbr command to view the information about the ABRand ASBR of OSPF.Example# Display the information of the OSPF area border routers and autonomous systemborder routers. display ospf abr-asbrOSPF Process 1 with Router ID 10.110.98.138Routing Table to ABR and ASBRI = Intra i = Inter A = ASBR B = ABR S = SumASBRDestination Area Cost Nexthop InterfaceIA 2.2.2.2 0.0.0.0 10 10.153.17.89 Vlan-interface1Table 54 Description of the fields of the display ospf abr-asbr commandField DescriptionDestination Router ID of the ABR or ASBRArea Area where the router is connected with ASBRCost The routing overhead value of the route
